+90 242 327 00 17
Our Social Accounts


24 April 2017


The modular water tank is a warehouse where the sheet metal parts are bolted to each other in the desired volumes.


Modular Water Storage Types
Stainless Steel Prismatic Modular Water Storage:
AISI 304 quality stainless steel is the most common and widely used type of stainless steel in the world. This material, which contains 18% chromium and 8% nickel, has excellent formability and corrosion resistance. AISI 316 quality stainless steel is produced according to your requirement.
Hot Dipped Galvanized Prismatic Modular Water Storage:
Coating with hot dip galvanizing is one of the longest lasting protection methods against corrosion. Because hot dip galvanized forms a high-thickness and homogeneous surface film on the metal surface, it penetrates to all areas including sharp corners, cut-outs, hole surfaces and voids, thus providing complete protection to the material.
  • Stainless Steel (AISI 304)
  • Stainless Steel (AISI 316)
  • Hot Dipped Galvanized (Galvanized is mostly used in fire warehouses or cleaning tanks, the same as stainless steel, resistant to corrosion, no paint required, resistant to high temperature and not affected by cold or hot air, can be disinfected with cleaning materials).
  • Without modular prismatic stores, it can be easily installed at desired locations.
  • All parts of your modular stores are made of stainless steel and under hygienic conditions.
  • Mushroom, moss, It does not contain.
  • No source.
  • In the installation process, it does not reveal harmful chemicals and never pollutes nature.
  • It never reacts with the fluid it contains.
  • If desired, they can easily be divided into small pieces and can be mounted at different locations from one to the other.
  • ST 37 Coats on sheet metal
  • Epoxy Paint
  • Electrostatic Powder Coating
  • Material: AISI 304 Quality Stainless Steel
  • Capacity: from 1250 lt to 300000 lt
  • Position: Vertical or Horizontal
  • Warranty: 2 years
  • Maintenance and repair is easy. The parts can be changed independently of each other.
  • It can easily be installed in favorite places, high floors, frames, houses and building entrances. It is designed to easily pass through the building entrances.
  • According to your request, we produce modular storage from 1250 lt to 300 thousand lt.
  • By using special methods, we produce the best and durable modules.
  • Parts can easily be converted to smaller pieces.
  • It is easy to install without using external resources.
Why would we prefer Modular Water Depots?

Clean, hygienic, long life:

All parts of these tanks are produced according to hygiene conditions. Mushroom does not contain algae. During installation, harmful chemicals do not release and never pollute nature….

The cost of having a modular water depot is reduced by a year:

It is a type of warehouse that is quite long-lived. Parts can be replaced independently if desired. It can be easily installed without using natural resources. No resource required. Depending on the nature of the liquid it contains, the tanks can be covered with different materials. It never reacts with the fluid it contains.

Can be used in different shapes in different places:

It can be easily installed and even demounted and remounted at a different location (Modules can be easily converted into smaller pieces in warehouse parts). Special proprietary EPDM seals are used to ensure leak tightness. It is easily mounted on favorite places, high grounds, frames, houses and buildings. It is designed to easily pass through the building entrances. According to Talebin production is from 1250 liters to 300 thousand liters.

product visuals


Comments of our visitors

No comments yet. You can be the first filling the form below.


Do you want to comment on this subject?